UPRtek MK350S PREMIUM User Manual page 7

2.1 Preparing Before Use
Power on
Press the Power button for 1 second and then release it.
When the power is on, the Power On LED will light the green indicator.
When the power is off, the green indicator will be off.
Dark calibration
MK350S Premium will display splash screen and then the screen prompts with message for
dark calibration.
1
"Do you want to do dark calibration?" Please select "Yes" .
2
After the sensor cover is put on, please select "OK".
3
When the screen shows "Dark calibration finish.", please press "OK" to
enter the main page.
1. Press and hold power key for 1 second to power on this product.
2. Press and hold power key for 3 seconds to power it off.
Please run dark calibration after each power on of this product.
3.
- 9 -
2.1 Preparing Before Use
Set up date and time
Set up date and time before taking any measurement.
1 2
Tap the "Flip Page" Tap the "Flip Page"
corner to enter the corner to enter the
next page. next page.
4 5
Once date is set, press
Yes to exit to setup
option page.
Press"Date"and"Time"
for its settings.
3
Click "Option" icon.
6
Once time is set, press
Yes to exit to setup
option page.
- 10 -