UPRtek MK350S PREMIUM User Manual page 8

2.2 Basic Measurement
Measurement
Click "BASIC" mode to enter measurement page.
1 Point optical sensor to light
source to be tested.
2 3
Press the "Measure" A viewport will display on the
button on the left side screen with a "cross hair" mark
(marked with an M). in the middle.
Press the "Measure" button on
the left side at appropriate
distance.
4
+
Beep sound
while measuring
This product beeps once
after measurement is done
and displays results on
screen.
- 11 -
2.2 Basic Measuremen
Save measurement data
1
Press Save key on the lower
right of the screen.
2
select "Yes" key.
3
Measurement data is now
saved in SD card. You may
note down file name if
necessary.
EXCEL file name：
ESPDY Y Y Y _ M M D D _ H H M M S S
.xls
regular ( year ) (month)(day) (hour/min/seconds)
▲ You may save entire source data.
JPG file name：
VIEWY Y Y Y _ M M D D _ H H M M S S
.JPG
regular ( year ) (month)(day) (hour/min/seconds)
▲ You may save the photo of viewport screen.
JPG file name：
IM G Y Y Y Y _ M M D D _ H H M M S S
.JPG
regular ( year ) (month)(day) (hour/min/seconds)
▲You may save measurement screen in "BASIC mode",
"SPECTRUM mode" and "CIE 1931.1976 mode".
- 12 -