Maintenance; Instructions For Returning By Mail; Method Of Maintenance; Cleaning The Cover - Promax -12 User Manual

7 MAINTENANCE

7.1

Instructions for returning by mail

Instruments returned for repair or calibration, either within or outwit the
guarantee period, should be forwarded with the following information: Name of
the Company, name of the contact person, address, telephone number, receipt
(in the case of coverage under guarantee) and a description of the problem or
the service required.
7.2

Method of maintenance

The method of maintenance to be carried out by the user consists of cleaning the
cover and changing the battery. All other operations should be carried out by
authorised agents or by personnel qualified in the servicing of instruments.
If the instrument does not respond to the controls for any unknown reason,
switch it off by pressing the disconnection key for a few seconds and then turn it
on again.
7.3

Cleaning the cover.

CAUTION:
CAUTION:
CAUTION:
January 2015
Do not use scented hydrocarbons or chlorized solvents.
Such products may attack the plastics used in the
construction of the cover.
The cover should be cleaned by means of a light solution of
detergent and water applied with a soft cloth. Dry
thoroughly before using the system again.
To clean the contacts, use a dry cloth. Do not use a wet or
damp cloth.
Do not use for the cleaning of the front panel and
particularly the viewfinders, alcohol or its derivatives,
these products can attack the mechanical properties of the
materials and diminish their useful time of life.
7-65