Navigating To A Waypoint; Using The Cursor; Using The Waypoints List; Moving A Waypoint - Raymarine H6 Owner's Manual

81238_1.book Page 35 Thursday, September 16, 2004 2:49 PM
Using waypoints

Navigating to a waypoint

You can navigate to an existing waypoint at any time using:
• the cursor.
• the waypoints list.

...using the cursor

...using the waypoints list

1. Select Route/GoTo/Waypoint. The Choose Folder dialog box appears.
2. Highlight the folder the waypoint appears in and click
3. Click the waypoint you want to go to.
4. Click
5. Click

Moving a waypoint

You can move a waypoint to a new position, or to your boat's current position.
To move a waypoint to a new position:
1. Place the cursor over the waypoint you want to move.
2. Press and hold the left mouse button.
1.Place the cursor over the waypoint you want
to go to.
2.Right-click. the right mouse menu is
displayed.
3.Click
OK
. The dialog box closes and an alert appears.
OK
.
Go To (name of waypoint)
.
OK
.
35