81238_1.book Page 45 Thursday, September 16, 2004 2:49 PM
Using routes
If you place a waypoint in the wrong position:
Following a route
CAUTION:
Before following a route, ensure that it is safe for navigation,
noting that the route may deviate from your actual path
travelled.
Once you have created a route, it can be followed manually or automatically using
the autopilot.
To follow a route:
Either:
1. Select Controls/Route/Follow Route On.
The chart plotter calculates bearing, distance and cross track error (XTE).
2. Manually steer the boat to follow the selected route,
or
1. Select Controls/Route/Follow Route On.
The chart plotter calculates bearing, distance and XTE. This information is
automatically passed to the autopilot.
2. At the autopilot control head, select Follow/Track. The autopilot will now
follow the selected route.
Delete Waypoint
1.Right click and select
the right mouse menu. The waypoint is
removed.
2.Move the cursor to the correct position and
click the mouse.
3.Continue to create your route as in steps 6 and
7 above.
45
from