Navigation; Autopilot Command; Navigating To A Waypoint Or Point Of Interest - Raymarine LIGHTHOUSE SPORT 3.18 Operation Instructions Manual

7.4 Navigation

Autopilot command

Element™ displays can send navigation data to a connected Evolution™
autopilot systems..
Note:
• Your autopilot system must have a compatible dedicated autopilot
controller connected. For a list of compatible autopilot controllers refer
to: p.145 — Compatible autopilot controllers
• For information on Evolution™ autopilot systems and required system
components refer to the Evolution installation instructions document
number: 87180 which is available to download from the Raymarine
website: www.raymarine.com
[Goto], [Follow] and [Stop] commands initiated on the Element™ display are
sent to the autopilot controller for acknowledgement.
Chart app

Navigating to a waypoint or point of interest

You can perform a "Goto" to a Waypoint or to a specific location.
1. Select the waypoint or point of interest and select [Goto] from the context
menu.
You can stop the [Goto] at any time by selecting Stop from the context
menu, or by selecting another [Goto].
The Chart app will begin active navigation.
2. Navigate your vessel to the destination point, using the Chart app as
a guide.
3. Select [OK] to accept the waypoint arrival alarm, which is triggered when
you reach a specified distance from the waypoint.
You can also perform a Goto from the [Go] menu: [Menu > Go ].
Note:
In a network that contains 2 Element™ displays, with one display performing
active navigation (i.e.: performing a [Goto] or a [Follow]) navigation options
will not be available on the networked display.
77