HELIOS COMBO SPH3600/5000-BL
3 Installation
Figure3-1 Installation clearance(unit: mm)
3.3 Installation Procedures
The following takes wall-mounted method for example. If adopting other installation method, adjust
installation procedures according to application.
Step 1
Determine installation place and mark installation holes in the proper height of wall according to the
fixed position paper, and then drill installation holes by hammer drill. The dimensions of installation
holes is as shown in Figure3-2.
The diameter of installation holes isΦ10.5mm and the depth of installation holes is in the 40mm to 45mm.
17