Installation; Unpacking And Checking; Installation Preparation; Installation Environment Requirements - Helios COMBO SPH3600-BL SERIES User Manual

HELIOS COMBO SPH3600/5000-BL
This chapter introduces the installation for inverter, include unpacking and checking, installation
preparation and installation procedures, etc.

3.1 Unpacking and Checking

Unpacking the inverter and conduct the following items:
⚫ Inspect the appearance for shipping damage. If any damage, report it to the carrier and your local
dealer immediately.
⚫ Check the delivery list to see if the types of accessories are complete and correct. If any
discrepancy, contact the distributor immediately.

3.2 Installation Preparation

3.2.1 Installation Environment Requirements

⚫ Keep the installation place as dry as possible and with good ventilation for heat dissipation.
⚫ Keep environment temperature under 60℃.
⚫ Install the device on a wall with enough bearing capacity.
⚫ Install the device in the place where children can't touch.
⚫ When installing device, the vertical gradient should be less than +15°. Don't install device
forwards.

3.2.2 Installation Clearance

After installing inverter, the reserved min. installation clearance of inverter is as shown in Figure3-1.

3 Installation

16
3 Installation