HELIOS COMBO SPH3600/5000-BL
6 Maintenance and Troubleshooting
This chapter mainly introduces inverter maintenance and troubleshooting.
6.1 Maintenance
Clean dust on the top of inverter regularly by dry and soft cloth. Don't use water, corrosive material,
cleaning agent and strong detergent, etc to clean the inverter.
If the display panel is too dirty to read, clear them by dry and soft cloth.
6.2 Troubleshooting
The inverter is designed according to the standards to meet the safety requirements. The system has
been tested strictly prior to exiting the factory. If any fault happens, the system will show the alarm
information and in the meantime, the system will stop operating. Potential reasons or causes for the
faults are as shown in Table6-1.
Table6-1 Troubleshooting
Items
PV
protection
Battery
protection
PV1 over-voltage
PV2 over-voltage
input
PV1 over-current
PV2 over-current
Insulation fault
input
Battery
over-
voltage
Recoverable or
Protection
not
Included
Yes
Included
Yes
Included
Yes
Included
Yes
Included
Yes
Included
Yes
35
6 Maintenance and Troubleshooting
Measures
Inform
maintenance
personnel.
Inform
maintenance
personnel.
Inform
maintenance
personnel.
Inform
maintenance
personnel.
Inform
maintenance
personnel.
Inform
maintenance
personnel if it occurs