How To Apply A New Probe Cover - ADC Adtemp 424 Instruction Manual

6. How to Apply a New Probe Cover

(1) Place a probe cover onto the storage case
hole with paper side upwards. Align the cover to
fit the hole exactly.
(3) Completely push the probe into the probe
cover holder hole. Push firmly.
Please Note: Unit is calibrated to work with probe covers. Only use of ADC
probe covers ensures accuracy and hygienic use.
NOTE
In order to avoid spreading germs, please use a new probe cover for each
measurement.
Check to ensure probe cover is fitted on firmly before use (please see the
diagrams below).
If the probe cover is broken, discard and apply a new one immediately.
(X) Incorrect
(2) Take the unit, vertically penetrate the probe
into the center part of the probe cover.
(4) After feeling a slight click, take out the
probe. The cover should be securely attached.
7
®
( ) Correct