Setup; Menu Basics; Navigation Buttons St; System Status - Rotel RSX-1550 Owner's Manual

40 40

SETUP

This Rotel receiver features two types of information displays to help
operate the system. The first consists of simple status displays that
appear on the TV screen and/or front panel display whenever primary
settings (Volume, Input, etc.) are changed. These status displays are self-
explanatory.
A more comprehensive ON-SCREEN DISPLAY (OSD) menu system is
available at any time by pressing the MENU/OSD button on the remote.
These OSD menus guide you through the configuration and setup of the
receiver. In general, the settings made in the configuration process are
memorized as default settings and need not be made again for normal
operation of the unit.
The OSD menus can be configured to display several different
languages. The default English version of all the menus is shown at the
front of this manual. If your language is available, those menus will be
shown in the following instructions. If you would like to change from the
default English language before proceeding, go to the instructions for the
OTHER OPTIONS menu later in this manual. From this menu, you can
change the language display.

Menu Basics

Navigation Buttons
ST
The following remote control buttons are used to navigate the OSD menu
system:
MENU/OSD button: Press to display the SYSTEM STATUS screen. From
the SYSTEM STATUS screen, press the ENTER button to display the MAIN
MENU screen which has links to all other menus. If a menu is already
visible, push this button to cancel the display. The MENU button on the
front panel provides the same function.
DOWN/UP Buttons: Press to move up and down in the lists of menu
items that appear on the OSD screens.
+/– Buttons: Press to change the current settings for a selected menu
item on OSD screens.
ENTER Button: From the SYSTEM STATUS screen, press ENTER to
display the MAIN MENU screen. From any other OSD screen, press
ENTER to confirm a setting and return to the MAIN menu.
RSX-1550 English v2.indd 40
RSX-1550 Surround Sound Receiver RSX-1550 Surround Sound Receiver

System Status

����������������������
�������
������������
�����������������
���������������������
�������������������������������
�����������������������
����������������
���������������������������
���������������������������
����������������������������������
The SYSTEM STATUS menu provides a snapshot of the current system
settings and a starting point for reaching all other screens and menus.
This screen appears when you press the remote MENU/OSD and
displays the following information:
LISTEN: the input source selected for listening.
VID INPUT: the video source selected for viewing. It is necessary to
assign a video input, by selecting from Composite 1–3, S-Video 1–3,
Component 1–3, HDMI 1–4 or OFF (no video) in the INPUT SETUP
menu.
RECORD: the source selected for recording from the VIDEO and AUDIO
outputs.
MODE: the current surround sound mode.
AUDIO INPUT: the input selected for the current source: Optical Digital,
Coaxial Digital, HDMI Audio, Analog, etc.
VOLUME: the current volume setting.
SPEAKERS: highlights the speakers that are currently configured for the
system (front right, center, subwoofer, front left, surround left, center back
1, center back 2, and surround right).
ZONE: shows the current status of ZONE 2, 3 & 4 (Z2, Z3 & Z4). In the
example, the ZONE 2 source is Video 1, ZONE 3 is OFF, and the ZONE
4 source is Video 5.
No changes can be made using this screen; it only provides information.
To go to the rest of the menus, press the ENTER button to go to the MAIN
menu. Press the MENU/OSD button on the remote to cancel the display
and return to normal operation.
Note: The SYSTEM STATUS screen appears for five seconds when
the unit is turned on and automatically turns off.
27/8/08 14:22:21