Tuner Controls; Band Buttons; Tuning Buttons; Memory Button - Rotel RSX-1550 Owner's Manual

36 36
commercial cinema and a home theater environment by reducing the
high-frequency content.
The EQ setting is independent for each source input. Using the button
only changes the setting for the currently active source input.

Tuner Controls

This Rotel receiver features a digital synthesized AM/FM tuner with
RDS capability and 30 station presets. The unit offers a wide range of
tuning options. Here is an overview of the tuning options (more detailed
information is provided in subsequent sections of this manual):
• Manual frequency tuning tunes up or down to the next station
frequency (when in frequency tuning mode). Press and release a
TUNING button (CH UP/DOWN on the remote) to tune.
• Direct frequency tuning lets you enter the desired station frequency
digits. Press the DIRECT button (or the FRQ DIRECT) button on the
remote) and enter the digits using the NUMERIC buttons.
• Automatic frequency search tuning searches up or down to
find the next receivable broadcast signal. Press and hold a TUNING
button (CH UP/DOWN on the remote) for at least one second to
search up or down.
• Station preset tuning lets you directly enter the number of a
memorized station preset. Enter the number of the memorized preset
using the NUMERIC buttons.
• Preset tuning jumps up/down to the next memorized station preset.
When in PRESET mode, press a TUNING button (CH UP/DOWN on
the remote) to select the next station preset. Press the PRESET button
on the remote to select PRESET tuning mode. Press the TUNE button
on the remote to select FREQUENCY tuning mode. Press the P-TUN
button on the remote to toggle between preset and frequency tuning
modes.
• Preset scan tuning automatically scans through the memorized
station presets, playing each for 5 seconds. Press the SCAN button
on the remote to begin preset scanning. Press the button again to stop
the scanning and listen to the desired preset.
• RDS (Europe) or RBDS (USA) tuning provides a range of special
tuning and search features based on data codes encoded with the
broadcast signal. See the RDS section of this manual for detailed
information.
Note: The receiver comes configured for tuning in the market
where you purchased it (N. America or Europe). To change this
default setting, see the information on the DEFAULT SETUP on-
screen menu later in this manual.

BAND Buttons

wI
Press the BAND button to toggle between AM and FM reception. An
indicator in the front-panel display confirms your choice and the currently
tuned station frequency is shown.
RSX-1550 English v2.indd 36
RSX-1550 Surround Sound Receiver RSX-1550 Surround Sound Receiver

TUNING Buttons

3P
The TUNING buttons (labeled CH UP/DOWN on the remote control)
provide three different tuning functions, depending on the mode of
operation.
In the normal FREQUENCY tuning mode, press a TUNING button
(CH UP/DOWN on the remote) and release to manually jump to the next
station frequency, regardless of whether or not a station is broadcasting
on that frequency. For auto frequency search tuning, press and hold the
TUNING button for approximately one second. An AUTO indicator will
appear in the front-panel display and the tuner will begin scanning up or
down through the frequencies until the next available signal is detected.
If this is not the desired station, repeat the automatic tuning procedure to
find the next station. Weak stations will be skipped during auto tuning.
Note: Select the FREQUENCY tuning mode by pressing the TUNE
button on the remote or toggle between FREQUENCY and PRESET
modes by pressing the P-TUN button.
In the PRESET tuning mode, press a TUNING button (CH UP/DOWN
on the remote) and release to jump to the next memorized station preset.
Note: Select the PRESET tuning mode by pressing the PRESET
button on the remote or toggle between FREQUENCY and PRESET
modes by pressing the P-TUN button. A PRESET indicator appears
in the display when PRESET TUNING is activated.
In the RDS PTY search mode, press a TUNING button (CH UP/
DOWN on the remote) to select the desired program type from the
scrolling list in the display. See the section on RDS tuning for more
details.
Note: Several indicators in the front-panel display assist tuning. A
large display shows the tuned frequency. A TUNED indicator lights
when a sufficiently strong signal is received. A ST indicator lights
when a stereo FM signal is received.

MEMORY Button

0B
The MEMORY button (labeled MEM and "X" on the remote is used with
the NUMERIC buttons to store memorized station presets. See the next
section for detailed instructions.

NUMERIC Buttons: Station Presets

The receiver can store up to 30 station presets for recall at any time using
the NUMERIC buttons on the front panel. To memorize a station:
1. Tune to the desired station, AM or FM.
2. Press the MEMORY button on the front-panel or remote. A MEMORY
indicator will flash for five seconds in the front-panel display.
3. While the MEMORY indicator is flashing, press the number of the
preset where you wish to store the station frequency. For example,
to memorize the station as preset 3, press the 3 button. To memorize
preset 15, press the 1 button followed by the 5 button.
4. A previously stored frequency is erased from memory when a new
frequency is memorized for the same preset number.
To tune to a previously memorized station, just press the preset number
on the NUMERIC buttons. For example, to tune to preset 3, press the
70B
27/8/08 14:22:18