Advertisement
Quick Links
Technical Information
Audio Software Upgrade Instructions
The RSP-1570, RSX-1550 and RSX-1560 have three separate software
modules – main software, video scaler software and DSP audio software. The
instructions below detail the procedure to update the audio software.
The procedure to update the audio software is accomplished with the use of the
Rotel DSP Upgrade Manager computer communications program.
This software is only for the RSP-1570, RSX-1550 and RSX-1560. Rotel does not
take any responsibility for loss of information or problems resulting from a failed
download. Units that fail after a download may be returned to Rotel for attention
under warranty.
Items needed for upgrade:
Windows-compatible PC with serial port connection, or USB-to-serial adapter.
RS232 cable with DB-9 to RJ-45 terminations.
Upgrade software and NEC Flash Upgrade download program.
DSP Upgrade Manager Program Installation
1. Download and save the audio update files from Rotel to a folder on the PC.
Make note of where the files are saved. (example: C:\Temp)
2. From the Windows Start Menu, choose "Run..."
3. When the run window opens, click Browse and locate the folder where the files
were saved. Select the file named "Rotel DSP Updater.exe".
4. Hit OK to run the setup program.
5. Once setup is running, follow the prompts to install the program into the folder
of your choice.
6. When installation is complete, please refer to the upgrade instructions on the
following page.
1
Rotel of America – 54 Concord St – North Reading, MA 01864 – Ph: 978-664-2870 – Fax: 978-664-4109
DATE: January 20, 2011
MODEL: RSP-1570, RSX-1550,
RSX-1560
Advertisement
Related Manuals for Rotel RSP-1570
Summary of Contents for Rotel RSP-1570
- Page 1 5. Once setup is running, follow the prompts to install the program into the folder of your choice. 6. When installation is complete, please refer to the upgrade instructions on the following page. Rotel of America – 54 Concord St – North Reading, MA 01864 – Ph: 978-664-2870 – Fax: 978-664-4109...
- Page 2 “Rotel DSP Upgrade Manager”. 5. Click the Open button. From the Open window, select the current software file to load, and click Open. Rotel of America – 54 Concord St – North Reading, MA 01864 – Ph: 978-664-2870 – Fax: 978-664-4109...
- Page 3 Initializing” followed by “Press the Next button for starting the procedure.” 8. Click the Next button again. The program should now read “Device Initialization OK” followed by “Press the Next Button” Rotel of America – 54 Concord St – North Reading, MA 01864 – Ph: 978-664-2870 – Fax: 978-664-4109...
- Page 4 After a confirmation prompt, the unit will shut down, and remain in standby. On power up, the unit will now be in its factory default configuration. Rotel of America – 54 Concord St – North Reading, MA 01864 – Ph: 978-664-2870 – Fax: 978-664-4109...
-
Page 5: Troubleshooting
Rotel or an authorized Rotel dealer. An incorrect or fault pin configuration on the RJ45 to DB9 upgrade cable can result in this error. Rotel of America – 54 Concord St – North Reading, MA 01864 – Ph: 978-664-2870 – Fax: 978-664-4109... - Page 6 5. To remap the com port, from Device Manager right click on the USB to Serial adapter and select Properties. Rotel of America – 54 Concord St – North Reading, MA 01864 – Ph: 978-664-2870 – Fax: 978-664-4109...
- Page 7 7. On the Advanced menu, there is a drop down menu listing all of the available com ports on the computer. Select an available port, and then press OK to close the menu and save the changes. Rotel of America – 54 Concord St – North Reading, MA 01864 – Ph: 978-664-2870 – Fax: 978-664-4109...