Auxiliary Connector; Figure 15: Cp70 Auxiliary Connector - Optronis CP70-12-M/C-188 User Manual

5.1.4 Auxiliary Connector

Auxiliary connector is used to access camera Sync In and Sync Out IOs and for firmware updates.
The connector is labelled "Aux" for CP70.
CP70 Series
Connector info:
Camera (A) connector type:
• Hirose HR10A-7R-6S
Cable Connector:
•
Hirose HR10A-7P-6P
Connector View:

Figure 15: CP70 Auxiliary Connector

Connector Pinout:
Pin 1: Sync IN
External Synchronization Input.
TTL level:
< 0,8 Volt (low)
> 2 Volt (high)
Pin 2: Reserved
Pin 3: Sync Out External Synchronization
Output.
TTL level @ high impedance,
0 to 2 Volt @ 50 Ohm.
Pin 4,5,6: GND Ground
-34-