Display Settings And Functions - 3M HCD-2 Operating Instructions Manual

Display settings and functions

1. Water Full LED Indicator
•Lights up when water tank is full.
2. Cold Water LED Indicator
•Lights up when "COLD" is set.
3. Hot LED Indicator
•Lights up when "HOT" is set.
•Red LED
4. Hot (Stand-by) LED Indicator
•Lights up when "HOT SELECTION" button is
5. Hot Selection Button
•To select hot water
•Tap to select between heating modes (Tank Heating Mode, Instant Heating
Mode or to turn heating OFF)
6. Cold/Ambi. Selection Button with LED indicator
•Tap to select cold or ambient water.
•Green LED
7. Water Dispensing Button
•Tap to dispense water into containers or cups after selecting the desired type of
water temperature (hot, ambient or cold)
8. Drain Switch
•I is on for Manual Drain setting. An alert sound will be triggered and water
source turned off.
•O is off for Manual Drain. Water source will be on for normal operation.
(Blue LED)
(Blue LED)
: Tank Heating Mode ; Green LED
: Ambient water; Blue LED : Cold water
: Instant Heating Mode
selected.(Red LED)
07