Maintenance Of Water Dispenser - 3M HCD-2 Operating Instructions Manual

Maintenance of water dispenser

Section
Location
Installation
Environment
Water
dispensing
spout
Use
Water gutter
Self-
maintenance
Maintenance
Filter
replacement
12
The unit can be installed at places with low water pressure that are
within water quality range.
Do not install the unit in the following places:
•
Anywhere that will expose the unit to direct sunlight
•
Anywhere near toilets
•
Anywhere with fluctuating temperatures devices
The spout should be cleaned at least once a week. If any foreign liquid
or items come into contact with the spout, the spout should also be
cleaned.
Avoid drinking directly from the dispenser and do not allow dirty items
or utensils to come into contact with the spout.
Do not pour any other liquids into the gutter other than water from the
unit.
Ensure that the gutter is cleaned at least once a week and pour away
excess water in the gutter when possible.
Ensure that the spout and the gutter are maintained regularly according
to the schedule listed above.
Ensure that there is 5 minutes of flushing.
Do not allow external shocks to the filter.
Details