Safety Information; Warnings - 3M HCD-2 Operating Instructions Manual

Safety information

Read, understand and follow all safety information contained in these instructions
TM
prior to use of the 3M
Retain these instructions for future reference.
Intended Use:
The 3M TM Filtered Water Dispenser HCD-2 is intended for use in filtering potable water for
drinking purposes. The system is typically installed at point of use, and must be installed by a
3M authorized professional installer according to installation instructions.
Explanation of Signal Word Consequences:
Indicates a potentially hazardous situation, which, if not avoided,
WARNING
could result in death or serious injury and/or property damage.
Indicates a situation which, if not avoided, could result in property
NOTICE
damage.

WARNINGS

About the Power Supply
To reduce the risks associated with hazardous voltage and fire:
Do not plug in multiple devices into the same power outlet or extension cord simultaneously.
●
Plug the power cord into a 220 V outlet with at least a rating of 10 A and power surge protection.
●
Please ensure the power plug and power outlet is clean and dry.
●
Damaged parts or machine malfunction are only to be repaired or replaced by 3M authorized
●
professionals.
To reduce the risks associated with hazardous voltage:
Do not operate the machine with wet hands.
●
Do not bend the power cord excessively or put heavy objects over the power cord. Ensure your pets
●
do not damage the power cord.
Do not use the equipment if there is any damage to power cord, plug or the outlet.
●
Important guide during installation / Use
To reduce the risks associated with fire and explosion:
Do not place the equipment in area with potential gas leak, or near heating devices.
●
Do not put candles, lit cigarettes, or any heating devices on the unit.
●
Filtered Water Dispenser HCD-2.
03