Intel S2600KPFR Product Specifications page 186

Appendix C: BIOS Sensors and SEL Data
Sensor Name Sensor
Number
QPI Fatal 07h
Error
(see Sensor
17h for
continuation)
QPI Link 09h
Width
Reduced
Memory Error 10h
Extension
(reserved for
Validation)
170
Sensor Sensor
Owner (GID) Type
33h (SMI 13h
Handler) (Critical
Interrupt)
01h (BIOS 13h
POST) (Critical
Interrupt)
33h (SMI 0Ch
Handler) (Memory)
Technical Product Specification
Event/Reading Type
Offset Values
73h (OEM Discrete)
0h = Link Layer
Uncorrectable ECC Error
1h = Protocol Layer
Poisoned Packet Reception
Error
2h = Link/PHY Init Failure
with resultant degradation
in link width
3h = PHY Layer detected
drift buffer alarm
4h = PHY detected latency
buffer rollover
5h = PHY Init Failure
6h = Link Layer generic
control error (buffer
overflow/underflow, credit
underflow etc.)
7h = Parity error in link or
PHY layer
8h = Protocol layer timeout
detected
9h = Protocol layer failed
response
Ah = Protocol layer illegal
packet field, target Node ID
Error, etc.
Bh = Protocol Layer
Queue/table
overflow/underflow
Ch = Viral Error
Dh = Protocol Layer parity
error
Eh = Routing Table Error
Fh = (unused)
77h (OEM Discrete)
1h = Reduced to ½ width
2h = Reduced to ¼ width
7Fh (OEM Discrete)
Offset Reserved
Event Data 2
Event Data 3
ED2 =
[7:0] = Node ID
0-3 = CPU1-4
ED3 = No Data
ED2 =
[7:0] = Node ID
0-3 = CPU1-4
ED3 = No Data
ED2 = Reserved
ED3 = Reserved
Revision 1.37