Table of Contents
Advertisement
Technical Product Specification
12 Environmental Limits Specification
Operation of the server board at conditions beyond those shown in the following table may
cause permanent damage to the system. Exposure to absolute maximum rating conditions for
extended periods may affect long term system reliability.
Note: The Energy Star compliance is at system level, but not board level. Use of Intel boards
alone does not guarantee Energy Star compliance.
Parameter
Operating Temperature
Non-Operating Temperature
Non-Operating Humidity
Acoustic noise
Shock, operating
Shock, unpackaged
Vibration, unpackaged
Shock and vibration, packaged
ESD
System Cooling Requirement in BTU/Hr.
System Cooling Requirement in BTU/Hr.
Disclaimer Note: Intel ensures the unpackaged server board and system meet the shock
requirement mentioned above through its own chassis development and system configuration.
It is the responsibility of the system integrator to determine the proper shock level of the board
and system if the system integrator chooses different system configuration or different chassis.
Intel Corporation cannot be held responsible if components fail or the server board does not
operate correctly when used outside any of its published operating or non-operating limits.
Revision 1.37
Table 68. Server Board Design Specifications
+10°C to +35°C with the maximum rate of change not to
exceed 10°C per hour.
-40°C to +70°C
90%, non-condensing at 35°C
Sound power: 7.0BA with hard disk drive stress only at
room ambient temperature (23 +/-2°C)
Half sine,
2g
peak, 11 mSec
Trapezoidal, 25g, velocity change 205 inches/second (80
lbs. to < 100 lbs.)
5 Hz to 500 Hz, 2.20 g RMS random
ISTA (International Safe Transit Association) Test
Procedure 3A
+/-12 KV except I/O port +/- 8 KV per Intel
Test Specification
1600 Watt Max – 5459 BTU/hour
2130 Watt Max – 7268 BTU/hour
Environmental Limits Specification
Limits
®
Environmental
141
Hide quick links:
Advertisement
Table of Contents
