Transport And Warehousing; Packing; Transport; Warehousing - Profitec Pro 500 Instruction Manual

The machine can be used again, as described in chapter 6 of the instruction manual.
The steam nozzle is blocked
Clean the holes of the steam nozzle carefully with a needle or paper clip.
For this purpose the steam nozzle may be unscrewed as well.
Replace the steam nozzle.
8

TRANSPORT AND WAREHOUSING

8.1 Packing

The PROFITEC PRO 500 is delivered in a special carton and protected by a plastic cover and foam.
Caution!
Keep packing out of reach of children!
Important
Keep packing and packing material for possibile transport! Do not throw it away!

8.2 Transport

• Transport the machine only upright, if possible on a pallet.
• Do not tilt or turn the machine over.
• Do not stack more than three units on top of each other.
• Do not place other heavy items on the packing.

8.3 Warehousing

• Keep the machine packed in a dry place.
• Do not stack more than three units on top of each other.
• Do not place other heavy items on the packing.
9

DISPOSAL

This product complies with EU Directive 2002/96/EC and is registered according to WEEE (Waste Electrical
and Electronic Equipment).

10 CE CONFORMITY

Conformity
The product complies with the following EU Directives:
Machine: 2006/42/EC
Low Voltage: 2006/95/EC
EMC: 2004/108/EC
PED: 97/23/EC
EN-Directives: EN 292-1, EN 292-2, EN 60335-1, EN 60335-2-15 or EN 60335-2-75, EN 55014, EN
61000-3, EN 61000-4, ENV 50141, EN 55104
Bedienungsanleitung / Instruction manual Profitec Pro 500
WEEE Reg.-Nr.: DE 97592029
26