4.
Remove the thin gasket of the
shower tray.
7.
Clean the groove before inserting
the new group gasket.
The steam nozzle is blocked
Clean the holes of the steam nozzle carefully with a thin metal object such as a needle or with a paper
clip.
For this purpose, the steam nozzle may be unscrewed as well.
Important
Do not lose the small gasket situated between the steam nozzle and the thread!
Afterwards replace the steam nozzle.
8
TRANSPORT AND WAREHOUSING
8.1 Packing
The PRO 300 is delivered in a special carton and protected by a plastic cover and foam.
Caution!
Keep packing out of the reach of children!
Important
Keep packing and packing material for possibile transport! Do not throw it away!
Translation of the original German user manual
5.
Now the group gasket can be
removed.
8.
Insert the new group gasket with
the rounded side facing upwards.
6.
Remove the group gasket with a
screwdriver.
9.
Re-insert the gasket and the
shower screen as seen in pict.4
and tighten them with the
countersunk screw.
ENGLISH
27