Spypoint MMS Quick Start Manual

MMS
Camera
Quick start guide
Allows to easily manage your photos and trail cameras online. A must
for enjoying your SPYPOINT trail camera to its fullest!
MMS cellular

Geotag capabilities
trail camera
Models:

MMS Cloud system
& comparable

User manual, latest firmware & FAQ
Account sharing

available at: support.spypoint.com
 tech@spypoint.com

 Automatic photo
 

sorting
 1-888-779-7646
v1.2 US
www.SPYPOINT.com/mms
Visit mySPYPOINT.com and create your
In the box
Note: Memory card and batteries are sold separately.
& photo management system
Mounting
Camera
bracket


Track back your cameras, com-
pile location information and
weather data over the years and
plan your next hunting season
MicroSIM Installation
effectively.
card* strap
Access your photos from * Already installed for the United States customers.
anywhere in the world. With the
cloud system, don't worry about
Components
losing your data.
Photo lens
1
2 LEDs
See your hunting partners' pho-
Test light
3
tos by sharing your account with
4 Battery case
your group.
Detection lens
5
6 Mounting bracket
Take advantage of the automa- Slot for installation strap
7
tic organization of photos and
8 Tripod mount
apply tags on photos to easily
Cable lock hole
find them. 9
Power button
10
Navigation buttons
11
Specs and features may differ across comparable models. Refer to website or
free BRONZE account now!
packaging for full details.

Quick start
guide

USB
cable
6
7
Viewing screen
12
13 Busy LED 8
12V/Solar panel jack
14
USB port
15 9
MicroSIM card slot
16
SD card slot
17
17
14 15 16
Getting started
REMOVE CAMERA FROM THE MOUNTING BRACKET
A.
1
A. Push the tab to release the camera from
the mounting bracket.
2
B. Remove the camera.
B.
3
4
CHOOSE A POWER SOURCE
6 alkaline
5
12V power source Lithium battery pack
or lithium AA
LIT-09/LIT-C-8
batteries
10
11
In order to get best results and longer battery life, we recommend
12
the use of an external 12V source. For easier access to the 12V jack,
remove the camera from the mounting bracket before plugging a 12V
13
cable. Then, the camera can be reinstalled in the mounting bracket.
Using your fingers, push down on each side of the
battery compartment's tab to open it.
1
To ensure maximum performance of the came-
ra and prevent battery leak, we recommend
the use of new batteries. Make sure to insert
each battery with the correct polarity. Do not
2
mix battery type - use ALL alkaline or ALL
lithium. Rechargeable AA batteries are not
recommended as the lower voltage they
produce can cause operational issues.
INSERT THE MEMORY CARD
Before inserting or removing a memory card, always turn off the camera
to prevent loss or damage of the photos already recorded. Insert an SD/
SDHC memory card (up to 32 GB capacity) in the card slot, gold con-
tacts facing up. The card is inserted correctly when a click is heard.
We suggest to format your SD card if it's been in another electronic
device to make sure you will have the maximum capacity of your
memory card.