Table of Contents
Advertisement
ADDITIONAL INFORMATION
Warning indicators
When the warning indicators (see below) light up or flash, the projector will automatically shutdown:
‡
"LAMP" LED indicator is lit red and if "On/Standby" indicator flashes red.
‡
"TEMP" LED indicator is lit red and if "On/Standby" indicator flashes red. This indicates the projector
has overheated. Under normal conditions, the project can be switched back on.
‡
"TEMP" LED indicator flashes red and if "On/Standby" indicator flashes red.
Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicator light up or
flash, please contact your nearest service center for assistance.
LED lightning messages
Message
Standby state
(Input power cord)
Power on (Warming)
Power on and Lamp lighting
Power off (Cooling)
Error (Lamp failure)
Error (Fan failure)
Error (Over temp.)
Standby State
(Burn in mode)
Burn in (Warming)
Burn in (Cooling)
Burn in (Lamp lighting)
Burn in (Lamp off)
62
English
On/Standby LED
(Red)
(Blue)
Steady light
Flashing
(0.5 sec off / 0.5 sec
Steady light
Flashing
(0.5 sec off / 0.5
sec on). Back to red
steady light when
cooling fan turns off.
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
(3 sec on / 1 sec off)
Flashing
(1 sec on / 3 sec off)
Temp LED
(Red)
on)
Flashing
Steady light
Lamp LED
(Red)
Steady light
Hide quick links:
Advertisement
Table of Contents
