Optoma DLP User Manual page 29

Hide thumbs Also See for DLP:
Table of Contents

Advertisement

USING THE PROJECTOR
Color
Adjust a video image from black and white to fully saturated color.
Tint
Adjust the color balance of red and green.
Gamma
Set up gamma curve type. After the initial setup and fine tuning is completed, utilize the Gamma Adjustment steps
to optimize your image output.
Film: For home theater.
Video: For video or TV source.
Graphics: For PC / Photo source.
Standard(2.2): For standardized setting.
1.8 / 2.0 / 2.4: For specific PC / Photo source.
Notee:
These options are only available if the 3D mode function is disabled. In 3D mode, user can only select 3D
for Gamma setting.
Color Settings
Configure the color settings.
BrilliantColor
enable higher brightness while providing true, more vibrant colors in picture.
Color Temperature: Select a color temperature from D55, D65, D75, D83, D93, or Native.
Color Gamut: Select an appropriate color gamut from Native, HDTV, Presentation, Cinema, or Game.
Color Space (non-HDMI input only): The Color Space is fixed in the following input sources:
(1) VGA(RGB)
Color Space (HDMI input only): select an appropriate color matrix type from the following: Auto,
RGB(0-255), RGB(16-235), YUV(0-255), and YUV(16-235).
Color Matching: Adjust hue, saturation, and gain for the red, green, blue, cyan, yellow, magenta, or
white color.
RGB Gain/Biase: This settings allows to configure the brightness (gain) and contrast (bias) of an
image.
Signal
Adjust the signal options.
Frequency: Change the display data frequency to match the frequency of your computer's graphic
card. Use this function only if the image appears to flicker vertically.
Phase: Synchronize the signal timing of the display with the graphic card. If the image appears to be
unstable or flickers, use this function to correct it.
H. Position: Adjust the horizontal positioning of the image.
V. Position: Adjust the vertical positioning of the image.
Notee:
This menu is only available if the input source is RGB.
Dynamic Black
Use to automatically adjust the picture brightness to give optimum contrast performance.
: This adjustable item utilizes a new color-processing algorithm and enhancements to
TM
(2) Component(YUV)
(3) Media(Auto).
29
English

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents