Optoma DLP User Manual page 45

USING THE PROJECTOR
Wireless Media Streaming
Select Wi-Fi Display to project your mobile device display to the projector through Wi-Fi connection. Then press
Enter on the remote control or
1. When using Wi-Fi Display function for the fi rst time, download and install the EZCast application into
your mobile device.
Notee: You can scan the QR code shown on the screen or download from the App Store or
Google Play.
2. On the projector, insert the Wi-Fi dongle and go to Settings > Network > Wireless Setting (Wi-Fi
Display). Then set the Wi-Fi setting to ON.
3. Connect the projector to an available network. For details, please refer to page 48.
4. On your mobile device, enable the Wi-Fi function. Then connect to the same network as the projector.
IMPORTANTT!
‡ The projector and your mobile device must be connected to the same Wi-Fi network.
‡ During the Wi-Fi Display operation, make sure that you have access to the internet.
on the projector keypad to enter the EZCast screen.
45
English