Peak PLIN-USB User Manual page 11

PLIN-USB – User Manual
2. Open the Windows Start menu, type peakcpl, and press
the Enter key.
The Properties of PEAK Hardware window opens.
3. Change to the LIN-Hardware tab and select the PLIN-USB
interface from the list.
4. Click on the Set Hardware ID button.
5. Enter a number (either decimal or hexadecimal with suffix
"h") as the new hardware ID and confirm with OK.
Tip: Add the assigned hardware ID to the casing of the PLIN-
USB, e.g. with a sticker, in order to quickly distinguish similar
interfaces.
11