Advanced Configuration; Statistics - Rosewill RNX-N300 User Manual

Wireless PCI CARD RNX-N300

3.6 ADVANCED CONFIGURATION

The Advanced tab is used to configure the wireless mode (802.11g, 802.11b/g-mixed, or
802.11b/g/n-mixed), Tx burst, and CCX.
• Wireless mode: Select 802.11 b/g/n mix if the wireless network uses both 11b, 11g, and
11n stations and APs. B/G Protection: This is the ERP protection mode of 802.11g.
Selecting auto will dynamically send frames with and without protection. Select On to send
a frame without protection, and Off to send it with protection.
• Enable Tx BURST: Click the check box will enhance the throughput
• Enable TCP Window Size: Enhance the throughput if enable this function.
• CCX: Enable this option if the network supports Cisco Compatible Extensions.
• Click on the Apply button to close this window.

3.7 STATISTICS

The Statistics tab displays transmit and receive packet statistics in real-time. Information
included is frames transmitted/received successfully, transmitted successfully without and after
retry, received with CRC error, duplicate frames received, etc.
35
User Manual