Rosewill RNX-N300 User Manual page 38

Wireless PCI CARD RNX-N300
• Rescan: Click on this button to view a list of Access Points in the area.
• WPS Information: Display the information about WPS on the selected network. List
information include Authentication Type, Encryption Type, Config Methods, Device
Password ID, Selected Registrar, State, Version, AP Setup Locked, UUID-E and RF Bands
• Pin Code: 8-digit numbers. It is required to enter PIN Code into Registrar using PIN method.
When RNX-N2X is Enrollee, you can use "Renew" button to re-generate new PIN Code.
• Config Mode: The RNX-N2X role-playing as an Enrollee or an external Registrar
• Detail: Information about Security and Key in the credential.
• Connect: Command to connect to the selected network inside credentials. The active
selected credential is as like as the active selected Profile.
• Rotate: Command to rotate to connect to the next network inside credentials.
• Disconnect: Stop WPS action and disconnect this active link. And then select the last
profile at the Profile Page of RaUI if exist. If there is an empty profile page, the driver will
select any non-security AP.
• Export Profile: Export all credentials to Profile.
• PBC: Start to add to AP using PBC configuration method.
• WPS Associate IE: Send the association request with WPS IE during WPS setup. It is
optional for RNX-2X
• WPS Probe IE: Send the probe request with WPS IE during WPS setup. It is optional for
RNX-2X
• Click on the OK button if you have made any changes.
38
User Manual