Rosewill RNX-N300 User Manual page 22

Wireless PCI CARD RNX-N300
• Profile: Enter a name for the profile; this does not need to be the same as the SSID.
• SSID: Enter the SSID of the network or select one from the drop-down list. The SSID is
a unique name shared among all points in your wireless network. The SSID must be
identical for all points in the network, and is case-sensitive.
• PSM: Select a power saving mode (PSM) option.
1. CAM (Continuously Awake Mode): Select this option if your notebook is always
connected to the power supply.
2. PSM (Power Saving Mode): Select this option if your notebook uses its battery
power. This option minimizes the battery usage while the network is idle.
• Network Type: Select Infrastructure from the drop-down list.
• TX Power: Select a transmit power from the drop-down list. If your notebook is
connected to external power then select 100% or auto, if not, select one of the lower
values for power saving.
• RTS Threshold: Place a check in this box if you would like to enable RTS Threshold.
Any packet in the RTS/CTS handshake larger than the specified value (bytes) will be
discarded.
• Fragment Threshold: Place a check in this box if you would like to enable Fragment
Threshold. Any packet larger than the specified value (bytes) will be discarded.
• Click on the OK button to save the changes.
22
User Manual