Table of Contents
Advertisement
2.4GHz Wireless Lite-N PCI-E Adapter
Chapter 3 Configuration
RNX-N150PCe can be configured by Wireless Lite-N Client Utility. This chapter describes
how to configure your Adapter for wireless connectivity on your Wireless Local Area
Network (WLAN) and use the data security encryption features.
After Installing the Adapter, the Adapter's tray icon
appears at the bottom of the screen, and shows the signal strength using color and the
received signal strength indication (RSSI).
If the icon is gray, there is no connection.
If the icon is red, there is poor signal strength and the RSSI is less than 5dB.
If the icon is yellow, there is poor signal strength and the RSSI is between 5dB and
10dB.
If the icon is green, there is good signal strength and the RSSI is between 10dB and
20dB.
If the icon is green, there is excellent signal strength and the RSSI is more than 20dB.
Double-click the icon and the Wireless Lite-N Client Utility will run. You can also run the
utility by clicking the Start→All programs→Rosewill→Wireless Lite-N Client Utility.
The Wireless Lite-N Client Utility provides some integrated and easy tools to:
Display current status information
Edit and add configuration profiles
Display current diagnostics information
The section below introduces these above capabilities.
3.1 Current Status
The Current Status tab contains general information about the program and its operations.
The Current Status tab needn't any configurations.
RNX-N150PCe
will appear in your system tray. It
20
User Manual
Advertisement
Table of Contents
