Profiles; Infrastructure Mode - Rosewill RNX-N300 User Manual

Wireless pci card

Hide thumbs Also See for RNX-N300:

Table of Contents

Wireless PCI CARD

RNX-N300

3.3 PROFILES

The Profile tab is used to store the settings of multiple Access Points such as home, office, café,

etc. When adding a profile you are required to enter a profile name and SSID as well as configure

the power-saving mode, network type, RTS/fragmentation threshold and

encryption/authentication settings. A profile can be configured as Infrastructure or Ad-hoc

mode. The configuration settings for each mode are described below.

The infrastructure mode requires the use of an Access Point (AP). In this mode, all wireless

communication between two computers has to be via the AP. It doesn't matter if the AP is

stand-alone or wired to an Ethernet network. If used in stand-alone, the AP can extend the

range of independent wireless LANs by acting as a repeater, which effectively doubles the

distance between wireless stations.

User Manual

Table of Contents