NXP Semiconductors TWR-RF-SNAP User Manual page 17

The Broadcast Ping icon, located in the Main Toolbar, can be used to refresh the identified Nodes in
the network. Clicking on this toolbar button will cause Portal to broadcast a special "answer if you
hear me" message to all nodes. When the nodes answer, any nodes that Portal did not already know
about will be individually queried for additional information. You might use this button if you just
added one or more new nodes to your network. Refer to the image below for the location of the
Broadcast Ping icon.
Figure 8 - Broadcast Ping Icon
The Node Info panel will contain only information relevant to the Node that is selected or highlighted
in the Node View panel.
When referring to the information in the Node Info panel or using the Node Info Toolbar it is
important that the correct SNAP Node is first selected in the Node View panel.
For example, to upload a new script to the TWR-RF-SNAP Tower Module, you must first ensure that
the SNAPTower Node is selected in the Node Info panel as shown in the image below.
Figure 9 - SNAPTower Selected in Portal
Refer to the Synapse Portal Reference Manual for detailed instructions regarding the application.
TWR-RF-SNAP User's Manual Page 17 of 22