Table of Contents
Advertisement
EN 12
4.
LC8.2HA LA
4.3.4
IR & LED Board
Refer to next figure for details.
1. Unplug connectors [1].
2. Use a flat screw driver to release the clip by pushing it in
the indicated direction [2].
3. Lift the board and take it out of the set.
When defective, replace the whole unit.
1
2
Figure 4-6 IR & LED Board
4.3.5
Key Board
Refer to next figure for details.
1. Unplug connectors.
2. Remove the screws [1].
3. Lift the unit and take it out of the set.
When defective, replace the whole unit.
1
Figure 4-7 Key Board
2009-Apr-10
Mechanical Instructions
4.3.6
H_17650_098.eps
180108
4.3.7
H_17650_094.eps
180108
Display Supply Panel
Refer to next figure for details (is for 42" set, for other
screensizes the process might slightly deviate):
1. Unplug connectors [1].
2. Remove the fixation screws [2].
3. Take the board out.
2
2
2
2
Figure 4-8 Display Supply Panel (42" set)
iBoard
Refer to next figure for details.
1. Unplug connectors.
2. Remove the screws [1].
3. Lift the unit and take it out of the set.
When defective, replace the whole unit.
Figure 4-9 iBoard
1
1
2
2
1
2
1
2
H_17740_021.eps
230108
1
18510_209_090409.eps
090409
Advertisement
Table of Contents
