Honeywell PM42 Service & Repair Manual page 46

TITLE
PM42 Service Repair Manual
Testing
OPERATION:
The PM42 will use the same service test software and fixture as manufacturing functional test software and fixture.
It is require running the printer through the service test especially when replacing new main logic board (MLB) and touchless
configuration unit assembly to program printer information to the new board.
Testing Instructions
1. The test procedure is OTPPMx2-000.
2. The software PM42 be found on the Intermec New Products Test Engineering SharePoint site. Access to this site is
available to Intermec Team Members only.
3. The test fixture bill of material can be found Intermec New Products Test Engineering SharePoint site. Access to this
site is available to Intermec Team Members only.
5. The test will require test media and ribbon material. See below.
Model Consumables
Used
PM42 DT Labels
PM42 TTR Labels
Ribbon
Model DOCUMENT NO.
L3-GLBL-RPR-3872
PM42
(Rev A)
Media/Ribbon Type
BL 4.0X6.0 W/THERM LTNG HI-TCK
LBL 4.0X6.0 TTRII PERM RIBBON,TTR
PREM 4420.4.1X18000
PAGE
Page 46 of 48
P/N
E06144
E06175
12064118
L3-GLBL-RPR-3872 (Rev A)