Spine - Honeywell PM42 Service & Repair Manual

TITLE
PM42 Service Repair Manual

Spine

OPERATION:
This is a NOT customer replaceable part. The spine (main deck) will rarely need replacement unless major damage require
doing so. Replacement of the spine require removing all install components, which is a complete disassembly of the printers.
Stock inventory of spine assembly on a need basis.
Tools Required
Description
Torx Driver T20
Parts Required
Item Part Number
1 50124886-001FRE
Spine Replacement
1. Remove all attached mechanical and electrical parts.
2. Remove the torx screws securing the spine against the base assembly.
Model
L3-GLBL-RPR-3872
PM42
(Rev A)
Description
FRE, Spine Assy, PM42 (include bearing)
Spine Assembly
DOCUMENT NO.
Page 35 of 48
1
PAGE
Qty
1
L3-GLBL-RPR-3872 (Rev A)