Honeywell PM42 Service & Repair Manual page 32

TITLE
PM42 Service Repair Manual
Ribbon Low Cable Sensor Assembly Replacement
1. Remove the electronic cover
2. Disconnect the ribbon low cable P25 on the main logic board (MLB)
3. Detach the ribbon sensor holder and pull the ribbon low sensor assembly through the spine (main deck).
Model DOCUMENT NO.
L3-GLBL-RPR-3872
PM42
(Rev A)
PAGE
Page 32 of 48
2
Ribbon Low Cable Sensor Assembly
L3-GLBL-RPR-3872 (Rev A)