Honeywell PM42 Service & Repair Manual page 16

TITLE
PM42 Service Repair Manual
Printhead Pressure Adjust Assembly Replacement
1. Turn the printhead lift lever counterclockwise to raise the printhead.
2. Remove the 5 torx screws securing the printhead pressure adjust assembly.
3. Prior to removing the printhead pressure adjust assembly, it is
lever and guide posts.
4. Reverse the procedure for installing the replacement printhead pressure adjust assembly.
Crank Lever
Position
Model
PM42
Printhead Pressure Adjust Assembly include torque pattern
DOCUMENT NO.
L3-GLBL-RPR-3872
(Rev A)
Media Gap Guide
Adjustment lever
IMPORTANT to note the position of the crank
1
PAGE
Page 16 of 48
4
4
x5
3
2
L3-GLBL-RPR-3872 (Rev A)