Lcd Touch Panel And Display Assembly - Honeywell PM42 Service & Repair Manual

TITLE
PM42 Service Repair Manual

LCD Touch Panel and Display Assembly

OPERATION:
This section covers the replacement of LCD display assembly and LCD touch panel.
Tools Required
Description
Torx Driver T10
Parts Required
Item Part Number
1
2
3
LCD Display Assembly Replacement
1. Remove the front panel to access the LCD display for replacement.
2. Remove user interface PCB assembly.
3. Remove the overlay.
4. Remove the torx screwing the touch panel under the overlay.
5. Remove the 5 torx screws securing the user interface PCB support bracket.
has 3 torx screws securing the user interace PCB support bracket.
6. Reverse the procedure for re-installation.
LCD Touch Panel Replacement
1. Remove the front panel to access the LCD display for replacement.
2. Remove user interface PCB assembly.
3. Remove the overlay.
4. Remove the torx screwing the touch panel under the overlay.
5. Remove the 5 torx screws securing the user interface PCB support bracket.
Model
L3-GLBL-RPR-3872
PM42
(Rev A)
Description
Front Panel Assembly
DOCUMENT NO.
Page 37 of 48
3.0 lbf.in/3.5 kgf.cm
5
PAGE
Qty
1
L3-GLBL-RPR-3872 (Rev A)