Tools - Martin M2GO HD Service Manual

Service manual
• Allow free unobstructed airflow to the bottom and
back of the product. Do not block the ventilation
slots.
• Only operate the console on a stable and solid
surface.
• Do not use the product if the ambient temperature
exceeds 40°C (104° F).
• Refer any service operation not described in this
manual to a qualified technician.
• Do not modify the product or install other than
genuine Martin™ by Harman parts.
• Transport the product only in suitable packaging
or a custom fitted road case. Transportation
damage is not covered under warranty.
• Protect the internal touch screen from sharp
objects and operate the screen using a finger
only.
Caution
Risk of fire and electrical shock. Only
use the product in dry locations.
Caution
Risk of explosion if the CMOS
battery is replaced with an incorrect
type. Dispose of used batteries
according to local environmental
regulations.
Caution
Do not expose the CMOS battery to
excessive heat such as sunshine or
fire.

Tools

Make sure that the tools below are available before you
start working on the product:
• Torx 10
• Torx 20
• Protective foam and cloth
• ESD mat and wristband.
M1 HD - Revision A, 05-16-2017
Figure 2: Tools
4 of 13