Configuration Requirements For The Ipsg; Required Configuration File Components - Cisco ASR 5000 Administration Manual

▀ Configuration Requirements for the IPSG

Configuration Requirements for the IPSG
This section provides a high-level description of the configuration requirements of the IPSG.
The Snoop and Server methods use the same configuration components and differ only in how the IPSG service is
configured.
The IPSG can be configured in various ways such as by creating a single context with interfaces for the RADIUS
messages and both inbound and outbound data traffic. The following figure presents another method in which the IPSG
context manages communication with the access gateway for both RADIUS messaging and inbound data traffic. The
ISP context is responsible for all outbound data traffic.
The following figure also shows other important components such as IP access control lists (ACLs) in both contexts as
well as an Enhanced Charging Service (ECS) configuration.
Figure 5.

Required Configuration File Components

The following configuration components are required to complete an IPSG configuration file:
 IPSG License
 Card Activations
 Local Context Modifications
 Network Management Interface
 Remote Management
▄ Cisco ASR 5000 IP Services Gateway Administration Guide
20
IPSG Support
IP Services Gateway Configuration
OL-27210-02