Pre-Paid Attributes - Cisco ASR 5000 Administration Manual

▀ Pre-paid Attributes

Pre-paid Attributes
Use the attributes listed in the following table to configure a subscriber for pre-paid billing;
Attribute Description
SN-Prepaid- If only SN-Prepaid-Inbound-Octets is in the Access-Accept, and the others are not, then the number of
Inbound-Octets outbound credits is infinite.
SN-Prepaid- If only SN-Prepaid-Outbound-Octets is in the Access-Accept, and the others are not, then the number of
Outbound-Octets inbound credits is infinite.
SN-Prepaid- If only SN-Prepaid-Total-Octets is in the Access-Accept, and the others are not, then pre-paid credits is only
Total-Octets enforced on the total byte throughput.
SN-Prepaid- SN-Prepaid-Timeout can be used alone or in combination with the other attributes. This integer RADIUS
Timeout attribute includes a time limit in seconds. Regardless of the values of the Octet counters, the session should
send a new authorization request upon timer expiration.
SN-Prepaid- SN-Prepaid-Watermark is optional with any of the attributes. If it is not included it defaults to the CLI default
Watermark subscriber configuration, which defaults to a value of 10%. This watermark applies to any of the pre-paid
attributes being enforced.
These attributes can be found in the following dictionaries:
 starent
 starent-vsa1
 starent-835
 starent-vsa1-835
 custom1 through custom9
Refer to the AAA and GTP Interface Administration and Reference for more details.
▄ Cisco ASR 5000 IP Services Gateway Administration Guide
156
Pre-paid Billing
OL-27210-02