Configuring Standard 3Gpp2 Pre-Paid Billing - Cisco ASR 5000 Administration Manual

Ip services gateway
Hide thumbs Also See for ASR 5000:
Table of Contents

Advertisement

▀ Configuring Standard 3GPP2 Pre-paid Billing

Configuring Standard 3GPP2 Pre-paid Billing
This section describes how to enable standard 3GPP2 pre-paid billing support.
Important:
that the most common or likely commands and/or keyword options are presented. In many cases, other optional
commands and/or keyword options are available. Refer to the Command Line Interface Reference for complete
information regarding all commands.
Enable pre-paid billing for the default subscriber by applying the following example configuration:
configure
context <context_name>
subscriber default
prepaid 3gpp2 accounting
end
Enable pre-paid billing for the default subscriber of a domain alias by applying the following example configuration:
configure
context <context_name>
subscriber name <alias_def_sub>
prepaid 3gpp2 accounting
end
Notes:
 You may add the optional keyword
command to stop sending the final online access-request on termination of 3GPP2 prepaid sessions.
 Optional commands: If both duration and volume attributes are received, default preference is given to the
duration attribute. To set the preference to the volume attribute, enter the following command:
prepaid 3gpp2 preference volume
Note that this command alone does not enable pre-paid support. The
command must be executed as shown to enable pre-paid support.
If you are using duration-based quota usage accounting, use the following command to define what behavior
specifies the end of the billing duration. The default behavior is the duration quota algorithm set to current-
time.
prepaid 3gpp2 duration-quota final-duration-algorithm [ current-time | last-
airlink-activity-time | last-user-layer3-activity-time ]
Note that this command alone does not enable pre-paid support. The
command must be executed as shown to enable pre-paid support.
▄ Cisco ASR 5000 IP Services Gateway Administration Guide
150
Commands used in the configuration samples in this section provide base functionality to the extent
no-final-access-request
to the
prepaid 3gpp2 accounting
prepaid 3gpp2 accounting
prepaid 3gpp2 accounting
Pre-paid Billing
OL-27210-02

Advertisement

Table of Contents
loading

Table of Contents