Table of Contents
Advertisement
Connections for a Standard-Definition TV and VCR
When using the 4250 with an SDTV, you must make one of the following connections to view content. Some
SDTVs may not have all of these connections. In addition, you can make connections to a VCR to archive
recordings to a VCR tape. Refer to your TV and VCR user's guide and the cabling diagrams in this guide for
more information.
Note: The labeling on your 4250 may vary from the labels shown in the following table.
Required Connections to an SDTV (choose one)
The Cable Out connection provides both a
video and a stereo audio connection to an
SDTV. See page 10 for an example.
The Video Out connection provides video
to an SDTV. The left and right audio outputs
provide stereo sound. These connections
generally provide a higher-quality signal
than the standard Cable Out connection.
See page 10 for an example.
The S-Video out connection provides
optimal video to an SDTV. The left and
right audio outputs provide stereo sound.
Optional Connections
The Cable Out connection provides the
video and stereo audio connection to the
VCR. See page 11 for an example.
For VCRs that have Video and Left and Right
audio connectors, you can use the OUT 2
connectors (Video, Left, and Right) on the
4250. These connections generally provide a
higher-quality signal than the standard Cable
Out connection. See page 11 for an example.
8
All manuals and user guides at all-guides.com
4250 Connections
CABLE
OUT
L
R
VIDEO
OUT
L
S-VIDEO
R
OUT
4250 Connections
CABLE
OUT
L
R
VIDEO
OUT
SDTV Connections
CABLE/
ANTENNA
L
R
VIDEO
IN
AUDIO 1
IN
L
R
S-VIDEO
AUDIO 1
IN
IN
VCR Connections
CABLE/
ANTENNA
L
R
VIDEO
AUDIO
IN
IN
Advertisement
Table of Contents
