Cisco cBR-8 Configuration And Troubleshooting Manual page 174

Enabling Usage-based Billing Feature Streaming Mode Using SNMP Commands
Example:
workstation# setany -v2c
ip-address rw-community-string
ccmCollectionType.0 -i 3
workstation#
Step 2 Set the ccmCollectionIpAddress and ccmCollectionPort objects to the IP address of the external collection server and
the TCP port number to which billing records should be sent:
Example:
workstation# setany -v2c
ip-address rw-community-string
ccmCollectionIpAddress.1 -o '0a 08 06 0b'
workstation# setany -v2c
ip-address rw-community-string
ccmCollectionPort.1 -g 6789
workstation#
Step 3 (Optional) Set the ccmCollectionIpAddress and ccmCollectionPort objects a second time to specify the IP address and
TCP port number of a second external collection server to which billing records should be sent, in the case that the Cisco
CMTS cannot connect to the primary collection server:
Example:
workstation# setany -v2c
ip-address rw-community-string
ccmCollectionIpAddress.1 -o '0a 08 06 0c'
workstation# setany -v2c
ip-address rw-community-string
ccmCollectionPort.1 -g 7000
workstation#
Step 4 (Optional) To change any of the other default parameters, set the appropriate objects to the desired values. For example,
the following lines configure the Usage-based Billing feature for a non-secure connection, with a collection interval of
45 minutes, and a maximum number of 3 retries.
Example:
workstation# setany -v2c
ip-address rw-community-string
ccmCollectionSecure.1 -i 2
workstation# setany -v2c
ip-address rw-community-string
ccmCollectionInterval.1 -i 45
workstation# setany -v2c
ip-address rw-community-string
ccmCollectionRetries.1 -i 3
workstation#
Step 5 (Optional) To omit the IP addresses of CPE devices from the billing records, set the ccmCollectionCpeList object to 2
(false). The default is to include the CPE information.
Example:
workstation# setany -v2c
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
162
Usage-Based Billing (SAMIS)