Cisco cBR-8 Configuration And Troubleshooting Manual page 184

Retrieving Records from a Cisco CMTS in File Mode
Example:
workstation# setany -v2c
workstation#
Step 3 Set the ciscoFlashCopyCommand to 3 (copyFromFlash) to specify that the billing record file should be copied from the
router's Flash file system:
Example:
workstation# setany -v2c
.582
-i 3
workstatioN#
Step 4 Set the ciscoFlashCopyServerAddress object to the IP address of the TFTP server:
Example:
workstation# setany -v2c
.582
-a "172.20.12.193"
workstatioN#
Step 5 Set the ciscoFlashCopySourceName object to the file name, including the device name, of the billing record file to be
transferred:
Example:
workstation# setany -v2c
.582
-D
"slot0:CMTS01_20030211-155025
"
workstation#
Step 6
(Optional) To specify a specific destination on the TFTP server, set the ciscoFlashCopyDestinationName object to the
path name and file name for the billing record file on the TFTP server. (Typically, the path name and file name should
already exist on the TFTP server.)
Example:
workstation# setany -v2c
.582
-D
"/cmts01-billing/billing-file
"
workstation#
Step 7 To execute the command, set the ciscoFlashCopyEntryStatus object to the active state (1):
Example:
workstation# setany -v2c
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
172
ip-address rw-community-string
ip-address rw-community-string
ip-address rw-community-string
ip-address rw-community-string
ip-address rw-community-string
ip-address rw-community-string
Usage-Based Billing (SAMIS)
ciscoFlashCopyEntryStatus.582 -i 5
ciscoFlashCopyCommand
ciscoFlashCopyServerAddress
ciscoFlashCopySourceName
ciscoFlashCopyDestinationName
ciscoFlashCopyEntryStatus.582 -i 1