Enabling Usage-Based Billing Feature Streaming Mode Using Snmp Commands - Cisco cBR-8 Configuration And Troubleshooting Manual

Enabling Usage-based Billing Feature Streaming Mode Using SNMP Commands

Command or Action
Example:
Router(config)#
Step 5 cable sflog max-entry number entry-duration time
Example:
Router(config)# cable sflog max-entry 2000
entry-duration 7200
Example:
Router(config)#
Step 6
cable metering source-interface interface
Example:
Router(config)# cable metering source-interface
loopback100
Example:
Router(config)#
Step 7 end
Example:
Router(config)# end
Example:
Router#
Enabling Usage-based Billing Feature Streaming Mode Using SNMP Commands
This section describes how to use SNMP commands to enable and configure the Usage-based Billing feature
so that it operates in streaming mode, where it regularly transmits the billing records to an external server for
use by the billing application.
To configure the Cisco CMTS for Usage-based Billing feature in streaming mode, you must set a number of
objects in the CISCO-CABLE-METERING-MIB.
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
142
Purpose
(Optional) Enables logging for deleted SNMP service
flows, which allows the billing feature to include
information about deleted service flows.
(Optional) Enables specification of the source-interface
for the billing packets, usually a loopback interface.
Exits global configuration mode and returns to privileged
EXEC mode.
Usage-Based Billing (SAMIS)