Message Severity Threshold - Cisco cBR-8 Configuration And Troubleshooting Manual

Call Home
• Daily—Specify the time of day to send, using an hour:minute format hh:mm, with a 24-hour clock (for
example, 14:30).
• Weekly—Specify the day of the week and time of day in the format day hh:mm, where the day of the
week is spelled out (for example, Monday).
• Monthly—Specify the numeric date, from 1 to 31, and the time of day, in the format date hh:mm.
• Interval—Specifies the interval at which the periodic message is sent, from 1 to 60 minutes.
• Hourly—Specifies the minute of the hour at which the periodic message is sent, from 0 to 59 minutes.
Hourly and by interval periodic notifications are available for the Snapshot alert group only.
Note

Message Severity Threshold

Call Home allows you to filter messages based on severity. You can associate each predefined or user-defined
destination profile with a Call Home threshold from 0 (least urgent) to 9 (most urgent). The default is 0 (all
messages are sent).
When you subscribe a destination profile to the Environment or Syslog alert group, you can set a threshold
for relay of alert group messages that are based on the message severity level. Any message with a value lower
than the destination profile threshold is not sent to the destination.
Subscribing to an alert group in a destination profile with a specified severity would also subscribe you to
messages triggered by the events that have same or higher severity in that alert group.
Subscribing to syslog message at low severity level is not recommended. This would trigger too many
Note
syslog messages that would lower the system performance.
Call Home severity levels are not the same as the system message logging severity levels.
Note
Table 2: Severity and Syslog Level Mapping
Smart Call Home
Level
9
8
7
6
5
Keyword
catastrophic
disaster
fatal
critical
major
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration Guide
Syslog Level Description
— Network-wide catastrophic failure.
— Significant network impact.
Emergency (0) System is unusable.
Alert (1) Critical conditions that indicate that
immediate attention is needed.
Critical (2) Major conditions.
Configuring Call Home
for Cisco IOS XE Fuji 16.8.x
17