Enabling Or Disabling Power Adjustment Using The Cli (Optional) - Cisco cBR-8 Configuration And Troubleshooting Manual

Enabling or Disabling Power Adjustment Using the CLI (optional)

Command or Action
Step 3
clear cable modem {mac-addr | ip-addr | [cable interface] all | ouistring
| reject} } counters
Example:
Router# clear cable modem 172.12.23.45 counters
Example:
Router# clear cable modem oui Cisco counters
Example:
Router# clear cable modem reject counters
Example:
Router# clear cable modem c4/0 counters
Example:
Enabling or Disabling Power Adjustment Using the CLI (optional)
The Cisco CMTS can automatically monitor a cable modem's power adjustments and determine whether a
particular cable modem requires a chance in the power adjustment method. To enable a cable interface to
make automatic power adjustments, and to set the frequency threshold for when those adjustments are made,
use the following procedure, beginning in EXEC mode.
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Cisco cBR Series Converged Broadband Routers Troubleshooting and Network Management Configuration
Guide for Cisco IOS XE Fuji 16.8.x
202
Purpose
Sets the flap-list counters to zero for one or
more CMs.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Flap List Troubleshooting