Factor O2 Assembly Manual page 8

2-2
Route the rear derailleur Di2 cable through the chain
stay. Install Di2 cable grommet. Connect to the Di2
Junction B.
2-4
Route the Di2 cable from the Junction A to the Junction B through the down tube (as pictured) to the bottom bracket
shell exit window.
Assembly Manual
2-3
Route the front derailleur Di2 cable through the seat tube hole to
the bottom bracket exit window. Connect to the Di2 Junction B.
2-5
Di2 Cable
Brake
housing
Carefully insert Junction B and all cables through the bottom
bracket shell window.
04