V.fdr; Scene; Automix; Surround - Roland VS-2480 Owner's Manual

28—UTILITY Menu Parameters

V.FDR

At the top of the V.FADER/USER screen is the USER KNOB/FDR
ASSIGN to parameter, described in "Controlling a Parameter of Your
Choice" on Page 141.
"V.Fader—The VS-2480 MIDI Control Surface" on Page 300 describes how to use the
V.Fader feature that turns the VS-2480 into a MIDI control surface.

SCENE

To learn how to use the SCENE screen, see "Editing Scenes" on
Page 145.

AUTOMIX

See "The AUTOMIX Screen" on Page 326 to learn about using the
AUTOMIX screen.

SURROUND

The SURROUND screen, and the use of Surround sound in the
VS-2480, is described in Chapter 25. See "Turning on Surround Mode"
on Page 321.

Oscillator/ANALYZER

Pressing the OscAna button reveals the GENERATOR/OSCILLATOR
screen and the VS-2480's test-signal generator. You can press F1
(Anylzr) to display the VS-2480's spectrum analyzer, described on
Page 374. To exit either of the screens, press F6 (EXIT).

Generator

When you press the UTILITY menu's OscAna button, the GENERATOR/
OSCILLATOR screen appears. This screen controls the VS-2480's generator that
produces various test signals and can produce the metronome's output.
372
Generator
on/off
switch
www.rolandus.com
Meters
display
Roland VS-2480 Owner's Manual
UTILITY menu
F6 (V.FDR)
UTILITY menu
F1 (SCENE)
UTILITY menu
F2 (A.MIX)
UTILITY menu
F3 (Surrnd)
UTILITY menu
F4 (OscAna)